PROCEDURE FOR WORKING WITH BLUE WAX AND 1000L LIQUID WAX

  USE SEALANT AS SUGGESTED           

APPLY    3 -4 COATS OF BLUE WAX

BETWEEN EACH COAT ALLOW   15-20 MINUTES DRYING TIME THEN LIGHTLY WIPE

TO GET EVENESS AND LITTLE SHINE

 RELEASE A PART

APPLY ONE MORE COAT WIPE LIGHTLY

 AT THIS POINT,MOLD IS CURED TO THE POINT THAT MULTIPLE RELEASES ARE POSSIBLE

 NOW RELEASE MORE PARTS TILL IT GETS HARDER

 AT THIS POINT APPLY ONE COAT LIQUID WAX AND AFTER IT DRIES LIGHTLY WIPE
..        
RELEASE MORE PART(S)

         
USE LIQUID WAX  AGAIN WHEN THE PULL GETS LITTLE HARDER

         
AFTER A FEW APPLICATIONS OF LIQUID WAX APPLY ONE COAT OF BLUE WAX TO

REPLENISH THE MOLD WITH THE WAX LOST DUE TO RELEASES

.          EACH PART TAKES AWAY SMALL QUANTITY OF WAX

           THIS WAY ELIMINATES THE TEDIOUS AND TIME CONSUMING WORK OF PREPARING THE

MOLD EACH TIME WHEN PVA AND WAX ARE USED