PVA Concentrate |
Packing: 5 Kg,10 Kg & 25 Kg carbouy
|
|
| |
| |
Accelerator |
Packing: 5 Kg, 10 kg carbouys, 22 kg & 200 kg drums
|
|
| |
| |
Hardner |
Packing: 5 Kg, 10 kg and 25 kg carbouys
|
|
| |
| ^top |
Promotor |
For use with bisphenol and vinylester resins
|
|
| |
| ^top |
Cutting Compound |
Application: Mold Maintenance
|
|
| |
| ^top |
Mold Sealer |
Mold surfaces are porous no matter hard they may be. If they are not sealed properly the wax and release agents will get sucked in and will not provide protection against poured resin and can give stuck-up. Use of sealer is thus very important in mold preparation procedure and it prolongs the life of the mold and thus allows to make many more parts. |
|
| |
| ^top |
Blue Wax |
blue wax offers multiple release high gloss and excellent surface finish,eliminating the use of pva.
|
|
| |
| ^top |
Liquid Release Wax |
Use Liquid wax in conjunction with
Finish Kare’s Blue Paste Wax to reduce wax buildup and
get multiple releases. It is very easy to use and reduces
work and saves time.
|
|
| |
| ^top |
Mold Release System |
Mold Releaser is a non-wax, non-silicone polymer
based Release agent fortified with high temp polymers for
high heat stability and accelerated exothermic heat releases
in newer composites. It provides Multiple Releases for all
Poly Ester Molds, Compression Molding, Vacuum Bagging
and Resin Transfer Molding - RTM.
|
|
| |
| ^top |
Fibre Glass Mat |
We have all kinds of fibre glass mat in powder/ emulsion, also available woven rovings 400 & 600 gsm, surface mat in glass and polyster. Printed surface mat are also available. |
|
| |
| ^top |
Mylar Film |
In 25 microns & 75 microns thickness, various widths are available. |
|
| |
| ^top |
Pigments |
All shades available, excellent gloss, mixing ratio 4 % to 6 %
Packing: 1 Kg |
|
| |
| ^top |
Unsaturated Polyester Resin |
General purpose, frr iso, vinyl & bisphenol resins and all gelcoats are available
Packing: 35/30 kg cans or 200/225 kg drums |
|
| |
| ^top |
Graduated Dispensers |
For measuring accelerator/hardner capacity of bottle: 500 ml
We have dispensers with 25ml capacity graduated with 5 ml, 10ml, 15ml, 20ml & 25 ml. These dispensers are made fom virgin pp natural material and are unbreakable. Any 500 ml bottle can be fitted on to them. |
|
| |
| ^top |
Molding Brushes |
Sizes Available: 1" ,2" ,2.5" ,3" & 4 inches.
Bristle length: 2.25 inches
both plastic handle and wooden handle are available. |
|
| |
| ^top |
Lamination Rollers |
Available in aluminum and mild steel
Wooden unpainted handles, sizes are as follows :
Detail rollers:Aluminum (LXD in mm)
100X25, 100X20, 75X25 ,75X20
Mild steel :(LXD in mm)
100X14, 75X14 ,40X14
Corner roller: (DXT in mm )
50X10
Paddle roller:(LXD in mm)
100X25
Radius rollers:(LXD in mm)
75X19
|
|
|
|
|
| ^top |
Silica |
20% to be added by weight of resin, will enchance the mechnical properties and also lower the cost of molding |
|
| |
| ^top |
Putty Powder |
Add to resin as required, will give a smooth paste and is very flexible to sand |
|
| |
| ^top |
Gelcoat Powder |
Add 5% to 6% by weight of resin, a glossy gelcoat is formed. |
|
| |
| ^top |
U V Powder |
10 gms to be added per 35kg of resin/gelcoat. for ultra violet stabilisation |
|
| |
| ^top |